Does your doorknob seem wobbly when you try to open or close the door? Unfortunately, this is a common problem found in older doors.

A loose doorknob or handle is a typical home repair project that almost all homeowners have to deal with at some point. Every so often, the doorknob loosens and starts to spin on its spindle, or the handle pulls away from the door’s surface when you try to open it. However, how you fix the problem highly depends upon your doorknob’s design or lever.

There are several reasons due to which a doorknob may loosen. For example, the doorknob may be old or subjected to dirt, it may become wobbly and needs proper adjustment, or it may have a missing screw. Whatever the reason is, you can quickly fix it on your own. Keep reading to find out what you can do about this problem.

Equipment and Tools Required:

  • Allen wrench
  • Phillips or flathead screwdriver
  • Paperclip/ thin stiff wire
  • Flashlight

Ways to Fix a Loose Doorknob:

How you repair a doorknob depends upon the handle design and lock system of the door. But you can fix it by following a few simple steps:

Identify the Screws:

One of the most common reasons for a wobbly doorknob is the loose screws. First, it would be best to identify the set screw inside the door’s collar; it may be a Phillips-head screw or flathead screw. Then, after identifying the screw, try to tighten it using the appropriate screwdriver. It’s not unusual for the screws to come loose on well-operated doors if they aren’t properly tightened.

Fix the Exposed Screws:

Another reason why doorknobs loosen over time is that the faceplate has two exposed screws that can loosen over time. In this case, the doorknob tends to wobble, causing trouble. If the doorknob has exposed screws, you’ll need to find the set screw inside of the door.

You can use a screwdriver or Allen wrench to release the set screw and remove the handle, which will expose the shaft. After that, all you need to do is tighten up the exposed screws on the faceplate using a screwdriver. However, remember not to overly tighten the mounting plate as it can make your lockset not work.

Fix the Hidden Screws:

Some doors have hidden screws behind their faceplate that may loosen over time. In order to reveal the screws, you need to look for the detent access hole when looking at the knob. The detent is a pin that is spring-loaded and sticks out of the little hole in the doorknob, keeping it from rotating. After finding the pin, use a flathead screwdriver and press it down on the pin to remove the knob.

Take out the rose collar to reveal the backplate and screws fastening to the door’s lockset mechanism. If the fasteners are wobbly, this may be the reason why the doorknob is loose. Try to tighten the loose screws using a screwdriver, replace the rose collar, and fasten it back in place. Lastly, put the doorknob back in its original position.

Replace the Screws When Needed:

One of the most common reasons for a wobbly doorknob is the loose screws. Many factors like age or dust can cause the screws to loosen over time, making the knobs wiggly. In order to avoid this, it would be best to replace them whenever possible. Remove the knob and take it to your nearest hardware store if the set screw is lost or damaged. Try to buy a proper replacement to fix the problem as soon as possible.

Are You Looking for Professional Handymen?

DIY repair projects can be a great hassle, especially if you’re unfamiliar with how things work. However, if you wish to fix your doorknobs on your own, you can do it by following the tips mentioned above. But, if you are looking for professional handymen, we got you all covered!

At Only Option Handyman Service LLC, we strive to provide you with the best services for your home restoration and maintenance projects. We have experience of over ten years of offering quick and hassle-free handyman services. Our experienced and highly-trained staff is responsive and alert. Not only do we reach your destination on time, but we also come entirely equipped with all the necessary tools and apparatus needed for the job. Contact us today!

Leave a Reply